Clio 4 reverse camera.

[claretandblue]

Has anybody installed a reverse camera on a clio 4 ? The red power wire isn't long enough to reach the reverse light which is on the tailgate, so i'm trying to connect it in the wiring harness in the boot, has anybody done this ?

[MIdev]

Bonjour
Tu as besoin de deux file rouge et noir pour les bronché depuis le feux arrière de la marche arrière version l'alimentation de votre caméra de recul.
Ensuite tu as besoin du +12v depuis votre caméra we recul vers le medianav sur le point 3.
Le RCA jeune de votre caméra doit être bronché sur les point 10 et 22 .
Merci

Hello
You need two red and black lines for the flickering from the rear lights of the reverse gear version of the power supply of your reversing camera.
Then you need the + 12v from your we back camera towards the medianav on point 3.
The young RCA of your camera must be waved on points 10 and 22.
Thank you

[claretandblue]

I need an alternative 12v power source as the reverse lights are on the tailgate.

[MIdev]

I need an alternative 12v power source as the reverse lights are on the tailgate.

indeed the camera must work simultaneously with the rear lights, it is easier to take 12v on the lights than to remove the gearbox

[claretandblue]

I need an alternative 12v power source as the reverse lights are on the tailgate.

indeed the camera must work simultaneously with the rear lights, it is easier to take 12v on the lights than to remove the gearbox

Managed to do it using the small red wire to pin 3 then connecting the other small red wire to the 12v supply.

[MIdev]

There you go , Congratulations